A flexible, high speed and highly automated form and seal machine
- High level of automation which reduces the need for manual operation (one person only)
- Smart design for safe and easy operation
- Wide range of products to be filled using external fillers.
Fördelar
En helt framtidssäkrad lösning som växer med dig – och du kan enkelt lägga till en förpackningsstorlek och anpassa linjens hastighet.
Kapacitet:
Hastigheten varierar i steg mellan 9 000 och 24 000 förpackningar i timmen.
Förpackningstyper
Tetra Pak® R1 stöder hela Tetra Recart® Midi-familjen.
Tillämpningar
Allt från släta såser och matiga soppor till grönsaker, djurmat och färdiglagad mat som pasta bolognese.
Funktioner
Carrier system
Enables use of external fillers
A unique transport system moves Tetra Recart® packages safely along the line, including the fill-and-seal machine and fillers. This mean external fillers can be combined with the Tetra Pak® R1 form-and-seal machine, increasing the range of possible filled products.
Multiple speed operation
Widens the range of food categories
The speed of the machine can be set at 9 000, 12 000, 16 000, 20 000 or 24 000 packs per hour. Since the required process time for different food categories varies, this feature makes it possible to adapt production speed to suit wide variety of foods.
Encased working parts
Low noise levels
All the moving parts are positioned on the side of the machine, which is enclosed in a metal casing and sealed with tight-fitting doors. The result is a plant environment with relatively low noise levels (76dB(A)) compared to industry norms.
Automatic carton loader (ACL)
Frees up the operators’ time
An operator is required to supervise the production start-up, but after that, carton blanks are fed into the form-and-seal machine automatically by the carton loader. This leaves the operator free to perform other tasks.
Induction sealing
Controlled, continuous sealing
The aluminium foil is heated under tight control, melting the plastic in the packaging material. The package is then sealed by pressure. The machine monitors critical parameters, and stops automatically if incorrect levels are detected.
PLMS data
Control and analysis
Packaging line monitoring system (PLMS) is a software tool used to automatically monitor and log the performance of Tetra Recart® packaging lines. The data can be used to analyze detailed production data and find ways for corrective actions and continuous improvement.
Operators interface
Operators work swiftly and efficiently
Several factors make this filling machine easy to operate: the Tetra Pak® Operator Panel with its intuitive touch-screen interface; large window enabling operators to watch production directly; and ground-level access to essential working parts.
Head space media
Choose just steam or steam and nitrogen
It is possible to reduce the amount of headspace in the package by using steam. You can also choose to use both steam and nitrogen. An injection of nitrogen gas minimises the amount of oxygen in the package before final sealing. This is useful for vegetable products, for example, as it prevents product discoloration.
