Benefícios
O Tetra Pak® Esvaziador de Tambor é uma unidade de alta flexibilidade, projetada para descarregar ingredientes líquidos de tambores, contêineres ou latas para um sistema de processamento, utilizando uma bomba. A bomba é conectada a uma lança de sucção por meio de uma mangueira. O sistema de balanceamento mecânico proporciona um manuseio ergonômico da lança de sucção. Os resíduos de ingredientes nos tambores de concentrado podem ser removidos com uma pistola de água. A tecnologia de injeção de água permite a fluidização localizada de ingredientes viscosos na extremidade da lança de sucção, aumentando o fluxo e reduzindo significativamente os tempos de descarga.
O Tetra Pak Esvaziador de Tambor está disponível com dois tipos de bomba e em diferentes dimensões.
Capacidade:
Descarregamento de tambores de até 200 litros.
Máx. a viscosidade do concentrado para DN 50 é de 10.000 cP.
Máx. a viscosidade do concentrado para DN 65 é de 30.000 cP.
As aplicações típicas incluem:
Descarregamento de diversos ingredientes líquidos como:
- Concentrados de frutas
- Ingredientes à base de aveia
- Pastas (ex.: pasta de tomate)
- Sucos com polpas e fibras
- Óleos
- Aromas
- E muito mais...
Efficient drum emptying for a wide range of liquid ingredients
- Viscous ingredients flow faster thanks to water injection technology
- Reduce batch preparation time for operators
- Better ergonomics for easier handling
Características
Water injection technology
Get viscous ingredients to flow faster
Water injection technology fluidizes viscous ingredients locally at the suction head of the lance so they flow faster – up to two times faster depending on the amount of water injected. A small amount of water is added, which is monitored by a flow meter so the amount can be taken into account when following a recipe. This technology allows a lance diameter of just 66 mm compared to about 100 mm normally needed for viscous ingredients.
Small lance diameter
Lance and hose are almost 50% lighter
Water injection technology allows a lance diameter of just 66 mm compared to bigger lances and hoses with the same capacity but without water injection. We calculate that a 66 mm diameter lance with a 5.5 m hose full of concentrate weighs 48 kg. In comparison, a lance and hose of the same length but with a diameter of 100 mm weighs 95 kg when full. Our 66 mm diameter lance and hose therefore weigh almost half, making them much lighter to handle.
Patented suction check valve
Prevents liquid backflow and suction of inlay
Normal non-return valves can affect the efficiency of aspiration by causing a pressure loss, but our unique valve gives minimal pressure loss so the unloader works at a high capacity. You get the benefits of a non-return valve to prevent liquid backflow plus suction is cut off when all the product has been emptied into the lance at the end of unloading the drum. Operators can empty the drum completely and the drum inlay cannot be aspirated by mistake.
Weight balancing system
For ergonomic manual handling
As standard, there is a weight balancing system for manual positioning of the lance with overhead mechanical support. Only a little manual effort is required to move the lance, thus ensuring smooth handling for operators.
No tipping or lifting of the drums is required as the drums can be unloaded while standing on the floor or on a pallet.
The hose never touches the floor so there is no tripping hazard or risk of damage from trucks.
Unloading at floor level
No tipping of dirt into your product
Do you know about the risks of tipping drums into a tank? Inlays, foreign matter or dirt stuck on the outside surface of the drum can fall off and drop into the product, especially if the tipping arm shakes the drum. Avoid this problem completely with our floor-level solution for unloading. Furthermore, inlays can’t be aspirated with our lance because the suction check valve prevents accidental suction of the inlay or parts of it.
