Snabbfakta
Tetra Pak® Tippenhet för påsar CIP är lämplig för Tetra Pak® Mixer med vakuumsystem eller varje form av batchmixningsprocess för pulver och vätskor. Ett separat dammutsugningsfilter säkerställer effektiv dammkontroll vid tippunkten. Åtkomstdörren låses automatiskt innan Cleaning In Place-cykeln påbörjas. När CIP-cykeln påbörjas diskas hela enheten med en enda spridarboll, som styr strålar av rengöringsvatten till enhetens samtliga inre delar.
Kapacitet
Konstruerad för 25-kilossäckar med pulver. Upp till 3 000 kg i timmen beroende på operatörens arbetskapacitet.
Lagringsvolym: 120 liter.
Tillämpningar
Till tillämpningar som kräver automatiserad rengöring med hög hygien, exempelvis industrier som hanterar allergener, smaker eller färgämnen.
Funktioner
Wet CIP nozzle
CIP is built in as standard
A single nozzle cleans all surfaces inside with cleaning agents and water at temperatures up to 90°C. Wet CIP is the only efficient way to remove every trace of flavour, colourant or allergen residue. CIP is the choice if you want to maintain high standards of hygiene. With this tipping unit, CIP is built-in from the beginning. This is a standard unit designed as an extension for your batch mixer. What’s more, we can offer it at a standard cost.
Unique shape
Shape ensures good flow of powder
The inside surfaces slope at an angle to ensure correct powder flowability down to the outlet. The corners of the unit are smooth and rounded, and there are no dead-ends where powder can be trapped. This ensures complete discharge without retention of powder. What’s more, the unique shape ensures complete liquid drainage from the wet CIP cycle. The body of the unit is made of food-grade 316L stainless steel.
Flexible discharge
Choice of downstream connections
This unit is suitable for Tetra Pak® High Shear Mixer with a vacuum system or any kind of batch powder and liquid mixing process. Therefore you have the flexibility to connect this bag tipping unit using:
- Vacuum mixer powder feeding
- Venturi powder incorporation
- Non-vacuum mixer - powder gravity feed
Ergonomic handling
Practical tipping position
The table height is 87 cm from the floor. This is the best design compromise to achieve an ergonomic table height while at the same time giving the unit a sufficient storage volume (more than 100 litres).
The table folds down for better access inside if necessary. The door folds up and out of the way so the operator does not bang his or her head on it. The sides are inclined away from the operator so they do not get in the way of arm movement.
Automatic door lock
Door is locked during the CIP cycle
The safety mechanisms built into the tipping unit enable the use of hot water and detergents in a safe manner because operators cannot open the unit during the CIP cycle. Another safety device makes it impossible to accidentally disconnect the downstream pipe during cleaning-in-place.
Alternativ
Dust extraction filter
Protect workers from airborne dust
The tipping unit can be connected to your existing dust extraction system, or we can supply you with the Tetra Pak® Dust Collector. This unit is specifically designed to fit the Tetra Pak® Bag Tipping Station CIP, featuring rounded corners to minimise powder retention. The Tetra Pak® Dust Collector is a unique, ready-to-use system that ensures hygiene standards in line with those required by the food and beverage industry.
Hot air dryer
For automatic drying after CIP
Automatic drying is available as an option by connecting a hot air dryer via an existing inlet. In this way, you can keep the unit closed during drying. There is no need to open the unit for drying manually with a tissue or cloth with the associated risk of contamination. Our automatic drying option gives you a more hygienic alternative to manual drying or to leaving Tetra Pak® Bag Tipping unit CIP open to dry overnight. You also release more time for operators to do something else instead of drying.
Valve on dust connection pipe
Avoid cleaning of the dust pipe
The standard solution for the CIP system is to clean not just the unit but the upstream and downstream pipes. This is to ensure that no dust residue can find its way back into the cleaned tipping area. However, as an option, you can choose to isolate the downstream connection pipe using a sanitary butterfly valve. This prevents cleaning of this dust pipe using CIP.
Tetra Pak® Dust Collector
Tetra Pak® Dust Collector är ett unikt dammsamlingssystem färdigt att använda som tar din hygiennivå till livsmedels- och dryckesindustrins standard. Tetra Pak Dust Collector är en standardprodukt i vår portfölj och eliminerar behovet av dyra, tidskrävande anpassade designer. Med sin operatörsfokuserade design är det en bekväm och följsam lösning som säkerställer en ren, säker miljö för livsmedels- och dryckesproduktion.
